Scissor lift for people

Saksebordslift til handicappede | HYDRO-CON Elevator A/S

Scissor lift for people with handicap | HYDRO-CON A/SHydraulic scissor lift for people with disabilities

A scissor lift, lifting table, scissor table, scissor platformt, there are many names. Is a lift or platform that can be raised and lowered using 2 hydraulic scissor arms running parallel to each other under the platform. The scissor arms are shown in the picture to the left.

The design of the scissor table has two primary advantages, in particular that the position of the scissor arms gives a very smooth movement and, secondly, that it is a stable solution suitable for lifting heavy goods and cargo for many years.

Vertical disability scissor table

HC450PVS (HYDRO-CON 450kg Person Vertical Scissors) and HC630PVS (HYDRO-CON 630kg Person Vertical Scissors) are special scissor products designed to be placed next to smaller stair ways, as an alternative, for people with disabilities, walking difficulties, and wheelchair users. In addition, the lift can also reduce the need for many manual lifts, such as for transporting goods up and down stairs, as it is suitable for passenger and freight transport. HYDRO-CON develops and manufactures its own products, and has been doing so for more than 35 years. Therefore, our scissor lift is available with different lifting capacities, you are not locked to the 450 or 630kg if a larger or smaller weight class is needed. In addition, our scissor table comes with its own shaft, which means you are free from having to pay for and prepare a standard concrete shaft.

Speed ​​and operation

HYDRO-CON's scissor table products are operated with hydraulics and run at a maximum speed of 0.15 meters per second. As a general rule, we recommend installing a scissor table only if a maximum height of 12 meters is required. Operation of the lift is carried out by the continuous push of a button, also known as dead man's operation, or holding pressure. There lift can be called from the floors outside of the lift, which can be installed in many different ways, as well as a side panel inside for operation. Furthermore, there is a drop-down list at the door, so that the lift stops and no one can be injured.

Full or half shaft installation

The HHC450PVS and HC6300PVS comes with its own aluminum shaft, which is adjusted according to whether the scissor lift is to be placed indoors or outdoors. For outdoor placement, the shaft is anodized, for indoor placement it is powder coated. The shaft can also be adapted as a full or half shaft on the upper floor. However, we recommend a full shaft, or a roof covering when outdoors.

As the scissor table or machinery itself sits beneath the platform, it is necessary to excavate and in most cases cast a pit under the installation site. However, platform, shaft and machinery are delivered in a unified all-in-one solution

Handicap elevator with open or closed shaft- gallery 1 | HYDRO-CON Elevator A/S
Handicap elevator with open or closed shaft- gallery 2 | HYDRO-CON Elevator A/S
Handicap elevator with open or closed shaft- gallery 3 | HYDRO-CON Elevator A/S
Handicap elevator with open or closed shaft- gallery 4 | HYDRO-CON Elevator A/S

 

Handicap elevator with open or closed shaft- gallery 5 | HYDRO-CON Elevator A/S
Handicap elevator with open or closed shaft- gallery 6 | HYDRO-CON Elevator A/S
Handicap elevator with open or closed shaft- gallery 7 | HYDRO-CON Elevator A/S
Handicap elevator with open or closed shaft- gallery 8 | HYDRO-CON Elevator A/S

 

Handicap elevator with open or closed shaft- gallery 9 | HYDRO-CON Elevator A/S
Handicap elevator with open or closed shaft- gallery 10 | HYDRO-CON Elevator A/S
Handicap elevator with open or closed shaft- gallery 11 | HYDRO-CON Elevator A/S
Handicap elevator with open or closed shaft- gallery 12 | HYDRO-CON Elevator A/S
 

Gallery of scissor lifts for persons

Above are some examples of HYDRO-CON scissor lifts for disability or person transport. They have all been installed as an alternative to a small staircase. The lift can be customized according to the customer's needs and wishes, which can be seen by having both half and full shaft solutions, as well as indoor and outdoor placement, and that the call on the lift also varies. As we produce our own products, measurements and other factors of the product can be customized as desired.

Click on the pictures to see them in full size.

Interested in disability solutions?

If the scissor lift for people has piqued your interest, we can be concated here, for more information, a quote or council. If you are looking for disability solutions, you can also take a look at our elevators or stairlift for people solutions.

 

CHECK

PRODUCED IN DENMARK

CHECK

+ 35 YEARS EXPERIENCE

CHECK

HIGH QUALITY

CHECK

LONG LASTING SOLUTIONS

 

Latest News Articles

Updated safety and maintenance regulations | HYDRO-CON Elevator A/S

Updated safety and maintenance regulations

HYDRO-CON updates safety and maintenance instructions for all products

At the end of 2023, HYDRO-CON has started the rollout of updated regulations for safety and maintenance. Read more

Kick-start of digitization | HYDRO-con Elevator A/S

Kick-start of digitization

HYDRO-CON kick-starts the digitization in collaboration with Erhvervshus Hovedstaden.

Through a collaboration with Erhvervshus Hovedstaden, Hydro-con elevator has kick-started activities for, among other things, the development of the company's digitalisation.

Read more
Merry Christmas & Happy New Year | HYDRO-CON Elevator A/S

Merry Christmas & Happy New Year

All our HYDRO-CON customers, suppliers and business relations are hereby wished a very Merry Christmas and a Happy and Prosperous New Year!

We have had an exciting year, with many internal changes that we look forward to presenting to you in 2023.

Read more