Hydraulic scissor lift for goods
A scissor lift, lifting table, scissor table, there are many names. Is a lift or platform that can be raised and lowered using 2 hydraulic scissor arms running parallel to each other. The scissor arms are shown in the picture to the left.
The design of the scissor table has two primary advantages, in particular that the position of the scissor arms gives a very smooth movement and, secondly, that it is a stable solution suitable for lifting heavy goods and cargo for many years.
Vertical goods scissors table
HC1000GVS (HYDRO-CON 1000kg Goods Vertical Scissor lift) is a special scissor platform product designed to reduce the need for many manual lifts, such as storage items down to basements. HYDRO-CON develops and manufactures its own products, and has been doing so for more than 35 years. Therefore, our scissor lift is available with different weight load capacities, up to several tons if needed. In addition, our scissor table comes with its own shaft, which means you are free from having to pay for and prepare a standard concrete shaft.
Speed and operation
HYDRO-CON's scissor table products are operated with hydraulics and run at a maximum speed of 0.15 meters per second. As a general rule, we recommend installing a scissor table only if a maximum height of 12 meters is required. Operation of the lift is carried out by the continuous push of a button, also known as dead man's operation, or holding pressure.
Full or half shaft installation
The HC1000GVS comes with its own aluminum shaft, which is adjusted according to whether the scissor lift is to be placed indoors or outdoors. For outdoor placement, the shaft is anodized, for indoor placement it is powder coated. The shaft can also be adapted as a full or half shaft on the upper floor. However, we recommend a full shaft, or a roof covering when outdoors.
As the scissor arms or machinery itself sits beneath the platform, it is necessary to excavate and in most cases dig out a pit under the installation area. However, platform, shaft and machinery are delivered in a unified all-in-one solution.
Gallery of scissor lifts for basement
Above are three examples of HYDRO-CON scissor lifts for goods that have been installed from floor plan to basement. The three lifts are all customized to the customer's needs and desires. The upper one has 3 full walls, the next one has exclusively roofs and stiffeners at the sides, and the last one consists of a half shaft solution on the ground floor and a full shaft solution in the basement. As we produce our own products, goals and other factors of the product can be customized as desired.
Click on the pictures to see them in full size.
Interested in handling goods?
If the scissor lift for goods has piqued your interest, we can be contacted here for more information, an offer or advice. If you are looking for solutions for handling goods, you can also look at our freight elevator or goods stair lift solutions.