Starter InLet MRL Elevator

MRL Starter InLet elevator without shaft | HYDRO-CON A/S

The InLet MRL Starter Elevator is the most economical of the InLet MRL series, and meets the requirements of most of the elevator market, which is why it is also our most popular built-in model.
MRL Starter Elevator seen from above | HYDRO-CON A/S
MRL Starter Elevator seen from above

InLet MRL Starter Elevator

InLet MRL (Machine RoomLess) Starter Elevator is our traction elevator designed to be internally mounted in an existing concrete shafts. The InLet MRL Starter Elevator is the most economical of the InLet MRL series, and meets the requirements of most of the elevator market.

The Inlet MRL Starter elevator is a fast elevator that runs at a maximum speed of 1 meter per second. As a fast elevator solution, the InLet MRL Starter elevator must comply with the Elevator Directive's standards for pit and top height. That is, the pit (dimensions below the shaft) must be a minimum of 1000 mm, and the top height (dimensions above the shaft) 3500 mm, for safety reasons. The elevator is suitable for running up to 45 meters vertically, which corresponds to approx. 16 stops.

Technical data for InLet MRL Starter Elevator:

The technical data for the MRL Starter Elevator varies depending on the space available in the existing concrete shaft. Below you can get an overview of the lifting capacity and specifications of the dimensions of the cabin as well as the requirements for the shaft. We recommend installing the InLet MRL Starter elevator only in indoor structures. If an outdoor solution is needed, we recommend our HSCO from our AluLet series.

Fælles for InLet MRL Starter Elevatoren, uanset mål og last kapacitet er at den består af en lukket elevatorstol, og at betjening sker ved impulstryk. Elevatoren har passagerens sikkerhed og komfort som første prioritet, med et æstetisk design og dæmpet lyd i kabinen. Desuden er der 2-vejs overvåget elevatoralarm. 

Persons Max load Cabin Width Cabin Depth Door Opening Shaft Width Shaft Depth
4 300 850 1050 700 1320 1350
6 450 1000 1300 800 1500 1600
8 630 1100 1400 900 1600 1700
10 750 1300 1400 900 1800 1700
13 1000 1400 1700 1000 1940 2000

Applies to all: Standard export, passenger transport, CE marked, for installation in concrete shaft. Done in accordance with DS/EN 81-20, EN 81-21, EN 81-70 & EN 81-28 (2006/42/EF = Machine Directive.)

InLet MRL Series

Our InLet MRL Series consists of 3 types of elevators, all of which are machine-roomless, traction solutions and which can easily be built into existing concrete shafts. InLet MRL Heavy, is designed for particularly heavy lifting and can handle people as well as goods transport. InLet MRL Rise, is designed for extremely high lifts and can handle up to 32 stops. Read more about the products below. Download the datasheet here.

 

CHECK

PRODUCED IN DENMARK

CHECK

+ 35 YEARS EXPERIENCE

CHECK

HIGH QUALITY

CHECK

LONG LASTING SOLUTIONS

 

Latest News Articles

Livredder virksomhed 2021 | HYDRO-CON Elevator A/S

Livreddervirksomhed i lokalområdet 2021

In a collaboration between Hjertestartnu and HYDRO-CON, a defibrillator has been set up at Netto in Gilleleje, as it is important to us to support good local initiatives. Read more
Electrical technician sought | HYDRO-CON Elevator A/S

Are you our new Electrical Technician?

Do you have competencies within electrical engineering and would you like to be part of a dynamic design and project team? Then apply and join our team in Denmark's only elevator producing company. Read more
Elevatorproduktion med mundbind | Hydro-Con Elevator A/S

Coronavirus and elevator safety

HYDRO-CON has had to adapt with a number of guidelines and initiatives to ensure our customers' safety in relation to safety when in contact with us and our elevators and lifts. Read more about coronavirus and elevator safety here. Read more