Rise InLet MRL Elevator

MRL Rise InLet elevator without shaft | HYDRO-CON A/S

The InLet MRL Rise elevator has the capacity for the highest lifts in the InLet MRL series, it is particularly suitable for high-rise buildings, and can operate up to 90 meters of lift height corresponding to 32 stops.
MRL RISE Seen from above | HYDRO-CON A/S
MRL Rise seen from above

InLet MRL Rise Elevator

InLet MRL (Machine Roomless) Rise Elevator is our traction elevator designed for interior mounting in an existing concrete shaft in high-rise constructions. The InLet MRL Rise elevator is a high-speed elevator that is ideal for high-rise buildings with many lifting meters.

The Inlet MRL Rise elevator is a fast lift that runs at a maximum speed of 1.6 to 2 meters per second. As a quick lift solution, the InLet MRL Rise lift must comply with the Elevator Directive's standards for pit and top height. That is, the pit (dimensions below the shaft) must be a minimum of 1000 mm, and the top height (dimensions above the shaft) 3500 mm, for safety reasons. The elevator is suitable for running up to 90 meters vertically, which corresponds to approx. 32 stops.

Technical data for the InLet MRL Rise Elevator:

The technical data for the MRL Rise Elevator vary depending on the space available in the existing concrete shaft. Below you can get an overview of the lifting capacity and specifications of the dimensions of the cabin as well as the requirements of the shaft. We only recommend installing the InLet MRL Rise lift in indoor structures. If an outdoor solution is needed, we recommend our HSCO from our AluLet series.

Common to the InLet MRL Rise Elevator, regardless of dimensions and load capacity, is that it consists of a closed elevator chair and that operation is done at pulse pressure. The elevator has the passenger's safety and comfort as the first priority, with an aesthetic design and muted sound in the cabin. In addition, there is 2-way monitored elevator alarm.

Persons Max load Cabin Width Cabin Depth Door Opening Shaft Width Shaft Depth
8 630 1100 1400 900 1710 1800
10 750 1300 1400 900 2030 1800
13 1000 1400 1700 1000 2130 2100
17 1275 1400 2100 1100 2200 2500
21 1600 1450 2400 1100 2250 2800
26 2000 1600 2500 1200 2400 2900

Applies to all: Standard export, passenger transport, CE marked, for installation in concrete shaft. Done in accordance with DS/EN 81-20, EN 81-21, EN 81-70 & EN 81-28 (2006/42/EF = Machine Directive.)

InLet MRL Series

Our InLet MRL Series consists of 3 types of elevators, all of which are machine-roomless, tow-born and which can easily be built into existing concrete shafts.InLet MRL Heavy, is designed for particularly heavy lifting and can handle people as well as goods transport. InLet MRL Starter, is the most economical and our most used product of the series.  Read more about the products by clicking below. Download the datasheet here.

 

CHECK

PRODUCED IN DENMARK

CHECK

+ 35 YEARS EXPERIENCE

CHECK

HIGH QUALITY

CHECK

LONG LASTING SOLUTIONS

 

Latest News Articles

Electrical technician sought | HYDRO-CON Elevator A/S

Are you our new Electrical Technician?

Do you have competencies within electrical engineering and would you like to be part of a dynamic design and project team? Then apply and join our team in Denmark's only elevator producing company. Read more
Produktionsleder søges | HYDRO-CON Elevator A/S

Are you our new production manager?

We are looking for a Production Manager for the only elevator manufacturer in Denmark. So if you have strong leaderships skills and competencies within electrical engineering, mechanics and steel - then come and become part of the team! Read more
Open Constructor position | HYDRO-CON Elevator A/S

Open position as a constructor in our development team

Do you want to develop and construct new and optimize existing products, for our product portfolio and take responsibility for both the technical and developmental aspects? Then come and see your ideas become reality in Denmark's only elevator manufacturing company. Read more